Izdelki za cena cevi iz titana (13)

Ti 3AI/2.5V (Titanium Grade 9) alloy is a near alpha, alpha-beta alloy, sometimes referred to as “half-6-4.” It offers 20 to 50% higher tensile strength than the commercially pure titanium at room and elevated temperatures. It is much more amenable to cold working than Ti 6AI/4V alloy and can be cold worked 75 to 85% to result in moderately high strength and good ductility. Furthermore, it is weldable as the commercially pure grades and has excellent resistance to torsion and corrosion.Ti 6Al/4V is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti. Amongst its many advantages, it is heat treatable. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):427 J/kg/°K Thermal conductivity:7.6 W/m/°K Thermal Expansion:7.9 μm/μm/°C Modulus Elasticity:107 Gpa Electrical Resistivity:12.6 μohm/cm Density:4.48 g/cm3

Stainless steel grades cover a wide range of compositions which result in the generation of a variety of microstructures and mechanical properties. This group of alloys is useful for the replacement of mild steel in structures and components. Stainless Steel tubes manufactured by Fine Tubes have an excellent combination of corrosion resistance, metallurgical stability and formabilityStainless steels are favoured because they are very cost effective. They also have an excellent combination of corrosion resistance, metallurgical stability, formability, and are easily welded. Their fabrication characteristics, good mechanical properties and attractive finished appearance make high quality stainless steel tubing a popular choice in a range of industries. Please note that we have a minimum order value of £10,000.

Alloy 22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy 22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi-purpose plants where such “upset” conditions occur frequently. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):414 J/kg/°K Thermal conductivity:10.2 W/m/°K Thermal Expansion:6.9 μm/μm/°C Modulus Elasticity:206 Gpa Electrical Resistivity:4.48 μohm/cm Density:8.69 g/cm3

UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):450 J/kg/°K Thermal conductivity:11.5 W/m/°K Thermal Expansion:15.8 μm/μm/°C Modulus Elasticity:190 Gpa Electrical Resistivity:9.52 μohm/cm Density:7.95 g/cm3

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:14 W/m/°K Thermal Expansion:16.7 μm/μm/°C Modulus Elasticity:19.6 Gpa Electrical Resistivity:73 μohm/cm Density:7.83 g/cm3

Duplex UNS S31803/1.4462 is a duplex stainless steel with approximately 50% ferrite and 50% austenite. This grade has good mechanical strength at room temperature, resistant to corrosive attack, including pitting and is resistant to stress corrosion cracking. The grade is a successful alternative to the normal 300 series austenitic stainless steels, where its higher strength and resistance to stress corrosion cracking is required in critical applications. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:15 W/m/°K Thermal Expansion:13 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:8.5 μohm/cm Density:7.8 g/cm3

Superior Tube Co. supplies above industry standard quality high performance used in the manufacturing of liquid and gas chromatography. High Performance Liquid Chromatography High performance liquid chromatography (HPLC) is used to analyze chemicals in both research and industrial processing. It’s an application that requires precision tubing, which is resistant to high temperatures, pressures and corrosion. For many years, Superior Tube has supplied tubes made from corrosion resistant austenitic, stainless steel and nickel alloys for a range of HPLC equipment. The tubing is used for the manufacturing of the columns in chromatography machines. This application requires exceptional inside diameter condition and overall tube strength to withstand the pressure involved when pumping liquids or gases through the column in order to extract samples for chemical analysis. Please note that we have a minimum order value of £10,000.

Alloy 209 is a fully austenitic nitrogen strengthened stainless steel, having twice the yield strength and superior corrosion resistance at room temperature when compared to 316/316L or 317/317L stainless steels. This grade does not become magnetic when cooled to sub-zero temperatures or to a cold working process and has high resistance to sulphide stress corrosion cracking in both annealed and cold worked/ cold worked & aged form up to 30 HRc hardness. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):134 J/kg/°K Thermal conductivity:15.6 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:199 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:16.2 W/m/°K Thermal Expansion:17.2 μm/μm/°C Modulus Elasticity:19.3 Gpa Electrical Resistivity:7.23 μohm/cm Density:8.0 g/cm3

316LN (UNS S31653) is a low-carbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances. The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

Surgical Implant 316L is a double melted stainless steel, regarded as a medical grade, this stainless steel is melted to achieve high levels of purity and cleanliness. It has excellent resistance to both general and intergranular corrosion, and pitting and crevice corrosion. The double melting allows for superior surface finish. Surgical implant 316L Stainless Steel is our most commonly sold medical stainless steel. Beyond removing impurities, this process, in combination with the unique nickel and chromium content of 316, tends to facilitate the formation of the surface chromium oxide layer that makes stainless steel corrosion resistant. There is some belief that surgical implant 316L forms a more substantial surface layer, and that this plays a strong role in protecting the host body from reactions to the nickel content of the material. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

The high precision seamless tubes manufactured at Fine Tubes begin their journey as seamless tube extrusions, in a range of different sizes. This material is reduced in size several times until it gradually reaches the exact specifications our customers require. Each time we perform a reduction process, the tube needs to be cut, cleaned and heat treated before the next one can commence. Please note that we have a minimum order value of £10,000.

S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):475 J/kg/°K Thermal conductivity:13.3 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3